ASSEMBLE THE TOOLS YOU’LL NEED
To take on the job yourself, you’ll first need to gather all of the supplies necessary to fix your leaky faucet. Normally, a leak is caused when the washer or seat assembly needs to be replaced, as the faucet then cannot create a seal strong enough to counteract the water pressure. You will most likely need a flat-head screwdriver, an adjustable wrench, replacement washers and O-rings, and penetrating oil like WD-40. These items are easy to find at a local Tampa hardware store and are relatively inexpensive to keep on-hand for future projects.
DON’T FORGET TO SHUT OFF THE WATER
Once you have your tools at your side, you can’t just start disassembling your faucet, there’s one more thing to do first: Turn off the water! We’ve all seen movies and heard horror stories where water from sinks start spraying all over the room when the faucet is taken apart. This is probably one of the easiest, and worst, mistakes to make in this project, as now you not only have a leaky faucet, but you’re also at risk of getting water damage. Water damage restoration can cost tens of thousands of dollars, so if you are unsure of how to turn your water off, or you don’t know what you are doing, call the professionals at Cass Plumbing right away. The water should be completely off from the sink handles to the knobs controlling the main line. This step is crucial to complete the job quickly and without not having a plumbing disaster in your Tampa home.
FIX THE ISSUE
Using your tools, you can now disassemble your faucet. The penetrating oil is useful for any stubborn screws or parts that are stuck; the oil will loosen the part and allow you to proceed. It will be important to remember what goes where as you remove the parts to make reassembly easier. You can either record your removal process, or simply set the objects aside in the order that they were taken. This will also help ensure that you put the faucet back correctly without introducing new problems in the process. Replace the washer and O-ring, as these are likely the source of your issue. These should be an exact fit into your valve seat. Once these are in place, rebuild your faucet and admire your handiwork.
WHEN ALL ELSE FAILS, CALL CASS PLUMBING
If you’ve followed these steps and the problem persists, it may be time to call an expert like Cass Plumbing. At Cass Plumbing, we have the tools, expertise and parts on-hand to fix a leak once and for all. Often, it’s fine to approach the problem as a DIY project, but don’t be afraid to call in an expert, like Cass Plumbing, when you need help.
Leaky faucets are a common occurrence in Tampa households. By following these steps, you’ll be able to stop that dripping in its tracks and save water. Call your Cass Plumbing of Tampa Bay for a plumbing consultation and help with all your faucet needs. You can reach us 24 hours a day, 7 days a week at 813-265-9200.